Solid Cast Cleaning Pig are special tools made use of to clean pipes, driven by gas, liquid, or pipe media. It can bring an electromagnetic establishing tool together with the ground obtaining tool to develop an electronic radar, and can also be outfitted with various other accessory devices to complete numerous complicated pipeline jobs.
Solid Cast Cleaning Pig has good flexibility. And it can add a mandrel inside. This improves its stability. All these make it a good choice for short-distance batching products.
This product is very lightweight. Its size can be customized from 2 inches to 48 inches. This product is good for cleaning pipes and isolating liquids. And it is soft enough to pass through the 1D elbow. It can accommodate up to 20% of the pipe limit. Therefore, this pig can also pass through curved pipelines of different diameters. So it can be used well in various pipelines.
This design allows the pig cup to be tightly attached to the pipeline. This makes it very airtight. Therefore, it can be used for the removal of gas or liquid in the pipeline. It can also be used for batching and hydrostatic tests. It can also remove paraffin, debris, or other deposits. And its weight is lighter than a mechanical pig. Therefore, it can run efficiently with a low wear rate.
After the pipeline construction, users usually use it to clean the pipeline and remove impurities. It can also be used for pipeline hydrostatic tests.
First, the user should check the roundness error before use. Then, after opening the valve, the user shall check whether the position and pipe diameter of the movable ball valve is accurate. And the weld at the joint shall be removed. Finally, the user shall discharge ash and wax in the pipeline. This can well maintain its service life. Finally, anti-corrosion coating shall be applied to the inner wall of the pipeline.