Description
Scraping Cleaning Pig is often used for pipeline cleaning. Its main material is medium density foam. However, different from other pig, it is pasted with a layer of steel brush on the surface. And its inner core is also equipped with a transmitter. This allows the product to detect conditions in the pipeline.
Usually, when the workers clean the pipeline, this product needs to be matched with the electronic transmitter and receiver. In this way, the pig position can be located by the signal of the transmitter. In addition, it can also check whether the pipe is blocked and where it is blocked. This is very convenient
In addition, the price of this Scraping Cleaning Pig is lower than that of mechanical pig and polyurethane pig. Therefore, foam pig is usually used for initial inspection of pipeline. Although the price of this product is low, its corrosion resistance is very poor. Usually, this product can only be used once, so it is not suitable for daily cleaning, but it is generally used for initial inspection. And this foam pig has certain water absorption, which can be used to dry the pipeline.
The following picture shows the relevant parameters of the product. It is the same as other foam pigs. But this product can not be filled with low-density foam. Because it has a transmitter installed inside. So this product with low-density foam will not support. This requires users’ attention. Contact us to learn more.
KEY FEATURES:
- This product is very soft. It can pass through pipes with different bending rates.
- Foam pig is usually made of medium and high density foam. There are steel brushes on its surface. Therefore, the cleaning ability is strong.
- Its inner core is equipped with a transmitter. This enables the product to locate and detect the environment in the pipeline
- The price of foam pig is lower than that of other pigs. It is generally used before the pipeline is put into production.
