Description
Scraper Cleaning Pig, based on 3 cups. Its main body is a steel structure. It has 3 cups and is equipped with a spring steel brush. The spring steel brush is a rare accessory of the pig. Its main feature is to fully clean the inner wall of the pipeline. Because the spring steel brush has good flexibility, it can effectively pass through the circular pipe.
Scraper Cleaning Pig is inevitable to encounter the problem of water outflow from gas wells during natural gas exploitation. Even though the separation of station equipment, the natural gas transmission pipeline still faces the problem of liquid accumulation. On the other hand, the long-distance pipeline gas transmission process will be affected by elbows, pipeline fluctuations, valves, etc.
At this time, the gas state changes significantly, resulting in the condensation of natural gas in the pipe. The liquid in the pipe will gradually gather in the low-lying section, resulting in the blockage of the half pipe and full pipe. This will reduce the pipeline transmission capacity, and even block the pipeline in serious cases, failing normal operation of the pipeline. At this time, a pig is required for cleaning. This product can solve this problem.
In addition, the cleaning force of the spring steel brush is not affected by gravity. For example, after using it for some time, the disc and cup have a stronger cleaning force on the lower part of the pipe. The top may be difficult to clean because the polyurethane material sinks due to gravity. However, if a spring steel brush is installed, this problem can be solved well.
The following photos show the specific accessories of a cup pig with a brush.
First, we can find many devices that are not in the photos. These accessories are mechanical pig devices. If users have unique requirements, we can add them to this project.
After that, the main steel frame of this product is made of carbon steel by default. However, we can also make stainless steel structures. Many cups and plates are made of polyurethane. It can also be replaced by rubber or nylon. Finally, the spring steel brush development project is established.
The relevant information about the project is shown in the photos that meet the requirements. Its size range is 2 ~ 60”, and the developed functional temperature level will be less than or equal to 80 ℃. Run 100 kilometers. The initial pressure is 0.2 ~ 0.3 MPa. In addition, the main purpose of this product is to clean the places where there is wax, asphaltene, asphalt, salt, sand, or particles inside the pipeline.
Custom designs and sizes are available. Please contact us for more details.
